Canon GL2 - Manual (Page 60)

60
E
Recor
ding
You can display the information on the LCD screen/viewfinder on a connected TV.
Press the “TV SCREEN” button to display the information on the TV screen. Press the button again
to cancel.
* Only available when AUDIO DUB. has been set to MIC. IN.
Press the “MIC” button. Select the sound quality (NORMAL, VOICE, W. SCREEN) by pulling the
SELECT dial up or down and press the SELECT dial in.
* Only available when AUDIO DUB. has been set to MIC. IN.
Use the microphone attenuator if, during recording or audio dubbing, you need to lower the
volume level or correct audio distortion via the microphone.
Press the “MIC ATT” button. Select ON or OFF by pulling the SELECT dial up or down and press the
SELECT dial in.
Press the “ZOOM GRIP” button. Select the grip zoom speed (VARIABLE, LOW, MEDIUM, FAST) by
pulling the SELECT dial up or down and press the SELECT dial in.
Press the “ZOOM HANDLE” button. Select the handle zoom speed (LOW, MEDIUM, FAST) by
pulling the SELECT dial up or down and press the SELECT dial in.
Grip Zoom Speed
Handle Zoom Speed
TV Screen
Microphone
Microphone Attenuator
+
,
+
CAMERA CARD CAMERA TAPE
+
,
+
,
+
,
+ PLAY
(VCR)
CARD CAMERA CARD
PLAY
(VCR)
TAPE CAMERA TAPE
+
,
+ * PLAY
(VCR)
TAPE CAMERA TAPE
+
,
+ * PLAY
(VCR)
TAPE CAMERA TAPE
+
,
+
CAMERA CARD CAMERA TAPE