Canon GL2 - Manual (Page 132)

132
E
Using a Memor
y Car
d
/
Make sure a memory card that has images recorded on it and a cassette that has enough
recordable space have been inserted into the camcorder.
1. Locate the point on the cassette where you wish to start copying and set it to
stop.
2. Select the first image you wish to copy by using the CARD +/– buttons.
• Still images on the memory card including and after that image will be copied onto the tape.
• If you wish to copy all the still images on the memory card, select the first image.
3. Open the menu and select CARD OPER.
4. Select COPY
.
• CANCEL and EXECUTE settings appear.
5. Select EXECUTE.
• Select CANCEL to stop copying.
• Cassette and card information appear in the display and copying starts.
• NOW COPYING
appears in the display.
• Each image is copied for about 6 seconds on the cassette.
• Copying stops when all the images have been copied or the tape is full.
6. Press the
7 button when your desired images have been copied.
[ ]
[ ]
COPY CARD OPER. [ ]
( 20)
You can copy multiple still images from the memory card to a tape.
• The still images’ data codes will reflect the date and time the copies are made.
+ PLAY
(VCR)
TAPE
+ PLAY
(VCR)
CARD
Copying Still Images from Memory Card to Tape