Canon GL2 - Manual (Page 134)

134
E
Using a Memor
y Car
d
Connecting to a PC Using a USB Cable
You can download still images from a memory card to a PC connected to the camcorder via the
USB interface. By using the supplied software, you can organize, store and print out still images.
When printing still images, you can add titles and frames to them.
Use the USB cable and the Canon Digital Video Solution Disk software supplied with the
camcorder.
For details on how to connect the camcorder to a PC and install and operate the
software, refer to the Canon Digital Video Solution Disk instruction manual.
• Refer also to your PC manual.
“PC CONNECT [USB]” appears to indicate that the camcorder is
connected to the PC with an USB cable.
Cautions:
• Do not disconnect the USB cable while data is being transferred (while the camcorder’s card
access indicator is flashing). Doing so may damage the data on the memory.
• The connection may not work properly depending on the specifications and settings of the
software and PC.
• The image files on your memory card and the image files you have stored (downloaded) to the
hard disk drive of your computer are your valuable, original image files. If you wish to use image
files on your computer, be sure to make copies of them first, and use the copied file, retaining
the original.
Notes:
While performing USB connection:
• The buttons, excluding the POWER switch and TAPE/CARD switch on the camcorder cannot be
used.
IFC-300PCU USB cable
: Signal flow
PC CONNECT[USB]