Storix Software SBAdmin AIX System Recovery Guide - Manual (Page 12)

Enabling Remote Installation Manager
This feature will allow connection to the SBAdmin System Installation Process from any remote system. With
proper authority, a remote user can connect to, diagnose and perform system installation of a system after that
system has been booted from the SBAdmin boot media. This process may be started from the SBAdmin
interface on a Network Administrator system, or from any SSH client application. Therefore, installation of even
a Workstation Edition system may be managed remotely.
The remote user will be required to enter a password to access the system installation process. This password
may have been defined when the boot media was created or may be defined in the system installation menus
after booting from the media.
The Remote Install Manager (RIM) may be configured and started in one of two ways:
Configuring RIM when Creating Boot Media
To start RIM automatically when booting a system from SBAdmin boot media:
Utilities !Create System Installation Media
Select either Menus (set defaults) or No prompt for the installation mode. The screen will expand to
include the following options:
Select “Yes” for Enable Remote Install Manager
Select the Configure button to the right to configure the settings. You will be presented with the
following window:
Storix System Backup Administrator 12 Version 8.2 AIX System Recovery Guide