Select local disk backup, Install from local nfs mount – Storix Software SBAdmin AIX System Recovery Guide User Manual

Page 34

Advertising
background image


You may also use sequential tape devices to restore from the backup if the backup spans multiple tapes
and you want the installation to automatically span the tapes inserted in different devices. This option is
identical to the use of a

Sequential Tape Device

. The devices previously configured on the system are not

known when booting in installation mode, so this option provides you a method of defining sequential
devices on the local system.

You must select at least two drives from the list. To do so, highlight the desired entry and press Enter. An
arrow (==>) will appear next to each option selected.

Important: You must select the devices in the same order in which they will be read.

Select Local Disk Backup

If you configured a locally-attached (or SAN-attached) disk for system backup/recovery (refer to

SBAdmin

User Guide

), and you performed the System Backup to a configured local system backup disk, you may

reinstall the system using that backup. If you select this option, the system will be scanned for one or more
system backup disks, and then the disks will be queried for available system backups. If any are found, a
screen similar to the following will appear, from which you may select the backup to restore:

Select a backup by highlighting the desired line and pressing ENTER, or press F3 or ESC key to cancel the
selection. After making your selection, you are returned to the

Change Installation Server or Device menu

.

Install From Local NFS Mount

If the system backup you wish to use for the recovery is located on a remote NFS share, you may use this
option to get access to the backup by performing a NFS mount of the share to the local system. Performing
recovery from local NFS mount is supported with

Network Edition

and

Workstation Edition

licenses only.

You must first select the

Set or Change NFS Mount Configuration

option which will display a screen

similar to the following:

Storix System Backup Administrator

34

Version 8.2 AIX System Recovery Guide

Advertising