Storix Software SBAdmin AIX System Recovery Guide - Manual (Page 49)

Detailed help on each option may be obtained by pressing the F1 or “!” keys.
You will not be able to create the volume group until you have selected at least one physical volume on which to
create. You must also have selected enough physical volumes to contain all of the logical volumes and
filesystems which will be created. To select or change the list of physical volumes on which to create the
volume group, move the cursor to the Physical Volume List field and press either the F4 or “$” keys. The
following pop-up window will appear with a list of physical volumes on the system:
The current volume group in which the physical volume is assigned will be shown, if any, and the physical
volumes assigned to the selected volume group are also indicated by an arrow (=>). To select or de-select a
physical volume, highlight the selection and press Enter. To return to the
volume group settings , press F3 or
ESC.
Storix System Backup Administrator 49 Version 8.2 AIX System Recovery Guide