CANOGA PERKINS 1502 Domain Management Module User Manual
Page 17
EdgeAccess Universal Chassis System
Model 1502 Domain Management Module
3-7
Table 5. System Configuration Options
Menu Item
Description
1. System Contact
2. System Name
3. System Location
Optional information, up to 50 characters
4. Default SNMPv1/v2c
Read Community
Password for SNMP Read access, up to 14 characters, default is
"public"
5. Default SNMPv1/v2c
Write Community
Password for SNMP Write access, up to 14 characters, default is
"private"
6. SLIP/PPP IP Address IP address for access through Serial Line Internet Protocol (SLIP) or
Point-to-Point Protocol (PPP)
7. DMM IP Address
IP address for this DMM; Table 6 lists the IP address classes and
default subnet masks
8. Subnet Mask
Mask that sets the network ID part of the IP address
9. Default Gateway
Address of the network node that connects to another network
10. BOOTP
"Enabled" if the module needs to obtain its IP address from a BOOTP
server; when the unit has an IP address, set to "Disabled"
11. Serial Port Mode
Type of serial port connection: VT100, SLIP, or PPP
12. Telnet Security
"Enabled" to use the security features included with Telnet;
"Disabled" to disable the Telnet security
13. Mgmt VLAN
Tagging
"Enabled" recognizes incoming management traffic only if it is
tagged to match item 14, Mgmt VLAN ID, ignores other traffic;
outgoing traffic will be tagged to match item 14
"Disabled" recognizes incoming management traffic only if it has no
VLAN tag, ignores all tagged traffic; outgoing traffic will not be
tagged
14. Mgmt VLAN ID
ID for the VLAN used for management
15. Mgmt VLAN P-Bit Priority for the VLAN used for management
Note: The SLIP or PPP IP address must be on a different network than the Ethernet IP address.
Because SLIP and PPP run point to point, the SLIP/PPP subnet mask is assumed from
the Class type of the SLIP/PPP IP address, and no gateway is allowed.
Table 6. IP Address Classes
Class
First Octet of Agent IP Address Default Subnet Mask
Class A
1-126
255.0.0.0
Class B
* 128-191
255.255.0.0
Class C
192-233
255.255.255.0
*Address 127 is reserved for loopback.
Note: Class C addressing is most common.