CANOGA PERKINS 1502 Domain Management Module - Manual (Page 35)

EdgeAccess Universal Chassis System
Model 1502 Domain Management Module 3-25
Manage a Module
If you know which chassis and slot a specific module is installed in, you can directly access and
manage it through the Module Menu. For details about a specific module, see the User Manual
for that module.
Note: You can manage most features of a module by opening the chassis management screen,
then selecting the module in the chassis; however, you cannot name a module through
that path.
To update software for a module, either follow the steps in the User Manual for the module or see
the steps on page 3-11.
To access the Module Menu, follow these steps:
1. From the DMM Main Menu, type 4 , or "Manage or access a specific Module," and press
<Enter>.
2. At the prompt, type the Chassis/Slot numbers for the module, such as " 1/4 ," for Chassis 1
and Slot 4, and press <Enter>. The Module Menu appears.
3. At the prompt, type the number for one of these options and follow the prompts on the
screen:
• Name the Module: Enter a string of up to 15 characters
• Reset the Module: Reboot the module, load the firmware stored in the active flash
memory, and reset counters, but retain the configuration information; follow the prompts
on the screen
• Reset and Switch Firmware on the Module: Reboot the module and load the alternate
firmware stored in the previously inactive flash memory; follow the prompts on the
screen
• Access User Interface: Opens the Main Menu for the module
4. To return to the Main Menu, press <Esc>.