Manage security – CANOGA PERKINS 1502 Domain Management Module User Manual
Page 22
EdgeAccess Universal Chassis System
Model 1502 Domain Management Module
3-12
3. Download the new firmware from the Canoga Perkins web site to your TFTP server; put the
firmware in the "
/BURNING
" directory. For FTP, enable binary transfer mode. When the
transfer is complete, the file is moved automatically to the "
/INACTIVE
" directory if it is
DMM firmware, or to the "
/MODULES
" directory if it is firmware for another module.
4. Go to the System Configuration menu and enter the IP address, subnet Mask, and default
gateway for the DMM.
5. At the Domain Management Module menu, type
5
, Upgrade Software, and press <Enter>.
6. At the Software Upgrade menu, type
3
, Get New File with TFTP, and press <Enter>.
7. Follow the prompts on the screen to enter the IP address for the TFTP server and the file
name for the new firmware, then start the upgrade.
8. If this is new firmware for the DMM, when the file transfer is complete, go to the Software
Upgrade menu, type
2
, Swap Bank, and press <Enter>. The DMM resets and starts using the
new firmware.
9. If this is new firmware for another module in the domain, follow these steps when the file
transfer is complete:
a. At the Software Upgrade menu, type
4
, Copy Software from Source to Destination, and
press <Enter>.
b. At the prompts, press <Space> to cycle through the information for the Source and
Destination, and press <Enter>; the upgrade runs automatically.
c. Go to the Module Menu to swap banks and reset the module.
Manage Security
To effectively provide system security for a variety of network applications, the DMM works
with Radius, SSH, and SNMPv3. For a brief discussion of security options, see page 1-4. To set
up DMM security, first set up the associated server(s); for details, see the documentation for the
server and software.
• To use a Radius server, you must specify the IP address for the DMM and the Shared Secret
that will authenticate communication between the DMM and the Radius server.
• To communicate with an SSH server, you must first download the SSH Client to your PC and
test connectivity.
• To use SNMPv3 security, set up the engine ID for the SNMPv3 agent in the device.
As you set up values for various security parameters on your DMM, see the documentation for
your network security system for details on and values for those security parameters. Typically,
you must have supervisor access to set up security for the DMM.