CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch - Manual (Page 50)

EdgeAccess Ethernet Switch
Figure 43. New Phonebook Entry
Step 8 Click the Server tab. From the Dial-Up Server Type drop down menu, select "SLIP: Internet."
See Figure 44.
Figure 44. Server Setup
Step 9 On the New Phonebook Entry window, check TCP/IP and click SLIP TCP/IP Settings and
enter a valid address. Record the IP address for future reference. The 9135G must be under the
same Subnet mask as the Host. Click OK.
Note: The SLIP IP address should be on a different Subnet than your LAN or other network
interface that uses TCP/IP Stack. Verify that "Force IP header compression" and "Use default
gateway on remote network" are NOT checked.
Model 9135G SNMP Managed Gigabit Ethernet Switch 4-6