CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch User Manual
Page 52
Advertising
EdgeAccess Ethernet Switch
Step 11 In the Dial-Up Networking window, check that the new properties are correct, then plug a
phone line into the computer modem and click Dial to connect to the remote 9135G.
9135G
Figure 47. Initialize Dial-Up to Remote 9135G.
Step 12 From the Windows Start button, click Programs, then DOS Commands Prompt. In the
MSDOS screen, type "ping" and the IP address of the 9135G. Reference Figure 48. The Ping
Program normally stops after three pings.
Figure 48. Confirm SLIP Connection
Step 13 In MSDOS, type "telnet" to open a Telnet session. The Telnet screen appears as shown in
Figure 49.
Model 9135G SNMP Managed Gigabit Ethernet Switch
4-8
Advertising