CANOGA PERKINS 9145E NID Software Version 3.1 User Manual
Page 163
9145E NID Software User’s Manual
Service OAM
Maintenance End Points
148
7. In the Port field, select User or Network.
8. To accept the new Maintenance End Point settings, type A and press Enter. The Maintenance End
Point Attributes screen (Figure 11-21 for 802.1ag or Figure 11-22 for Y.1731) opens.
9. To modify an attribute value, type the number of the attribute and press Enter, or press Esc to
return to the Maintenance End Point List screen.
Figure 11-21 Create a New Maintenance End Point screen (Y.1731)
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V03.10(GA0014) 05:15:27
----------------------CREATE A NEW MAINTENANCE END POINT------------------------
1) MA ID 0
MEP ID: 0
2) Admin Status: Disabled
3) Direction: Down
4) Port: User
Enter number in range 1 - 65535, or (CTRL-L) to select from list.
------------------------------------Messages-----------------------------------