CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 46)

System Configuration 9145E NID Software User’s Manual
System Information
31
3.6 System Information
The System Information screen is used to add or edit administrative and circuit information, such
as the name of the 9145E, contact, location, customer, circuit, equipment codes and Common
Language Equipment Identification (CLEI) information.
System Name, Contact, and Location are the same as the MIB-II variables sysName,
sysLocation, sysContact.
1. From the System Configuration menu, select System Information (5) and press Enter.
The System Information screen (Figure 3-18) opens.
2. Type the number of the parameter to enter information about, then press Enter.
3. Type new information or edit existing information and press Enter.
4. To return to the Main Menu, press Esc. When finished, use Enter to save the settings,
then Esc to return to the System Configuration menu.
Figure 3-18 System Information screen
1. System Name The system name can be up to 25 characters long. It is displayed in the
header under Ethernet Network Interface Device. If you are running multiple telnet
sessions, you will be able to identify the NID you are viewing.
2. Contact Maximum of 25 characters.
3. Location Maximum of 25 characters.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V03.10(GA0014) 15:52:50
------------------------------SYSTEM INFORMATION-------------------------------
1. System Name : dut-1-147
2. Contact :
3. Location :
4. Customer :
5. Information :
:
6. Circuits :
:
7. Service Code :
8. Date-in-Service :
9. Date-Out-of-Service :
10. Equipment Type :
11. Equipment Code :
12. Vendor : Canoga Perkins
13. CLEI :
14. Mfg Date : 02/01/2008
Select [1-14]:
-----------------------------------Messages-----------------------------------