CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 86)

Port Information 9145E NID Software User’s Manual
Port Configuration
71
Figure 5-11 Port Filters screen
To set the port filters, type the filter item number (1 to 6) and press Enter.
1. PVST + BPDU Filter When this attribute is enabled, the 9145E will discard PVST + BPDU frames
received on the specified port. Press the Space bar to select User Port Enabled, Net Port Enabled,
Both Ports Enabled, or Disabled. This is a Cisco proprietary protocol.
2. User Port Manager MAC Filter When this attribute is enabled, the 9145E will block packets
entering the unit which have the unit’s MAC address as the source MAC Address. This prevents
spoofing of Management frames. Press the Space bar to select User Port Enabled or Disabled.
3. User Port Test Network Filter When this attribute is enabled, the 9145E will inspect and discard
all packets entering its User port that have a source IP address on the same subnet mask as the
Test network. This prevents spoofing of test packets. Press the Space bar to select Enabled or
Disabled.
4. Link OAM PDU Filter When this attribute is enabled, the 9145E will block Link OAM PDU frames
from being generated from or passed through the unit. Press the Space bar to select Enabled or
Disabled.
5. UDLD Filter When this attribute is enabled, the 9145E will block Cisco Systems proprietary
tagged and untagged UDLD frames from passing through the unit. Press the Space bar to select
Enabled or Disabled. This is a Cisco proprietary protocol.
6. Management VLAN Filter When this attribute is enabled, the 9145E will block traffic that is
tagged with the Management VLAN on the specified port. This will not affect management packets
that are addressed to the 9145E. Press the Space bar to select Disabled, User Port Enabled, Net
Port Enabled, or Both Ports Enabled.
You can set additional port filters at the More Port Filters screen.
Canoga Perkins Corp. Ethernet Network Interface Device 03-JAN-1970
9145E-101-1-0 V03.10(GA0014) 00:22:22
----------------------------------PORT FILTERS----------------------------------
1) PVST+ BPDU Filter Disabled
2) User Port Manager MAC Filter User Port Enabled
3) User Port Test Network Filter User Port Enabled
4) Link OAM PDU Filter Disabled
5) UDLD Filter Enabled
6) Management VLAN Filter Both Ports Enabled
Select [1-6, (M)ore filters]:
------------------------------------Messages-----------------------------------