CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 64)

Diagnostics 9145E NID Software User’s Manual
VLAN Loopback
49
After starting a Layer 2 Ping, the following statistics will appear on the bottom half of the screen:
First Transaction ID Transaction identifier for the first LBM sent out in this test.
LBM Transmitted
Number of LBMs sent out in this test.
LBR Received Number of valid LBRs been received in this test.
LBR Out Of Sequence Number of LBRs been received in this test, which are out of sequence.
LBR Unexpected Number of unexpected LBRs received during this test.
Figure 4-9 802.1ag Loopback Configuration
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V03.10(GA0014) 11:20:59
-------------------------------L2 PING GENERATOR-------------------------------
1) Destination MAC Address 00-00-00-00-00-00
2) VLAN ID (1-4094) 1
3) VLAN Priority (0-7) 0
4) Ethertype (4 Hex digits) 8902
5) MD Level (0-7) 7
6) Egress Port Net
7) Frame Count (1-99999999) 1
8) Minimum Frame Size (60-9996) 60
9) Maximum Frame Size (60-9996) 1514
10) Incremental Size (0-256) 0
11) Frame Time Interval (0-500 10ms) 0
12) Frame Format IEEE 802.3
13) Start L2 Ping
Select[1-13]:
------------------------------------Messages-----------------------------------