Caution, Warning attention, Do not reel in the end of the line – Daiwa SEABORG-300FB User Manual

Page 3

Advertising
background image

DO NOT allow end of line to be wound onto the spool.This may cause synchronization with the levelwind to

be lost, a condition that can damage the levelwind due to the reelʼs high power output. Should this happen,

line should be removed from spool and rewound.

After each trip, attach line to line clip to prevent it accidentally being wound onto reel.

Caution

Precautions

W

arning

Attention

1. Be careful to keep fingers clear of the levelwind mechanism. It can pinch your fingers

and cause injuries.

2. When the clutch is engaged and the line feeding motor is in operation, be careful not

to catch your fingers to avoid any injury.

1. If your sinker or lure is caught on the bottom, cut your line rather than jerk the rod to free

it.(Protect your hands with gloves or towel.)

2. After fishing, rinse and dry the reel thoroughly. Store in a dry place.Loosen the drag after

use.

3. Handle the reel with care. Dropping it may cause damage.

4. Do not touch the line while reel is running. It could cut your skin.

5. Use this reel for fishing purposes only.

6. Be careful not to get reel grease on your clothing.

7. Do not use metal wire for the main line.

8. Sharp impacts due to inadvertent drop or other reasons may cause reel body breakage,

damage to the inner electronic components, and cracks or short circuit of the board,

resulting in functional disability.

1. Do not disassemble the reel. It could result in malfunction that could damage the reel

or cause personal injury.

1. Do not touch moving parts while the reel is operating or it may cause injury.

2. Drag adjustment should only be done with the auto winding functions off.

1. When you use a power source other than the battery or the power source provided by

boat, be sure it is of the proper voltage. Excess voltage will harm the reel and may

generate enough heat to burn your hands.

2. Do not use badly rusted cord to prevent electrical heat.

1

Do not reel in the end of the line

line

snap

line clip

end of the line

Advertising