Dynon Avionics EFIS-D100 Pilots Users Guide - Manual (Page 24)

Available Pages
EFIS Main pages
Available in 1/3, 2/3 and full formats
The EFIS-D100 default screen rotation includes only 2/3 EFIS
pages combined with the various EMS and HSI pages described
below. However, you may also choose screen configurations that
use 1/3 and full-screen pages. The 2/3 and full-screen pages can
display EFIS- and EMS-related info items on the left and right
side of the screen. You can enable any of the non-default EFIS
screens as described in the Changing the Screen Rotation section
on page 3-5. Some of the displayed items described below may
not be onscreen, depending on whether or not they have been
enabled in the CLUTTR menu.
Beginning with firmware revision 3.0, Dynon adopted a
dramatically different EFIS display format than it had previously
used. If your EFIS display does not resemble the layouts shown
at right, first ensure that you are using firmware version 3.0 or
higher. Then, ensure that the setting at EFIS > SETUP > STYLE
is set to MODERN. If you prefer the previous display style, you
can change this setting to CLASSIC. The classic display format
is documented in previous revisions of this manual, available on
Dynon Avionics’ website at
docs.dynonavionics.com . No further
development will occur on the classic display format.
The following sub-sections describe the displayed items in
detail.
4-2 EFIS-D100 Pilot’s User Guide