Dynon Avionics EFIS-D100 Pilots Users Guide - Manual (Page 37)

EFIS Operation
5-4 EFIS-D100 Pilot’s User Guide
The airspeed bug can be adjusted on any EFIS page in the system and is synchronized across all EFIS-based
units.
When in the BUGS > IAS menu, rotate the AP74’s or HS34’s VALUE knob to quickly change the bug’s set
e.
g
itude. If you have the altitude bug displayed, the marker moves up or down the altitude tape as you
value.
ALTITUDE
In the BUGS menu, press ALT. Press the TOGGLE button to turn on or off the altitude bug display on the altitude tap
In the ALT bug menu the value-setting box is displayed in the lower part of the display. Press SEL► to select which
digit to change and DEC- and INC+ to change the selected digit. Press the SYNC button to synchronize the altitude bu
to your current alt
change its value.
The altitude bug can be adjusted on any EFIS page in the system and is synchronized across all EFIS-based
units.
When in the BUGS > ALT menu, rotate the AP74’s or HS34’s VALUE knob to quickly change the bug’s set
n
150 feet of the target. Flying more than 200 feet away from the target triggers a short audio alert and alternates the bug in
value. Alternately, the altitude bug can be adjusted at any time by using the HS34’s or AP74’s VALUE knob.
Exact behavior is defined in the SETUP > (HSI or AP) > VALUE KNOB menu.
If the BUGS > ALM button is toggled to ALT, then turning the altitude bug on enables the altitude alerter function
with the bug value as the target altitude. While climbing or descending toward the target altitude a level-off alert sounds
when passing through 500 feet from the target altitude. The target altitude is considered captured when altitude is withi