Dynon Avionics EFIS-D100 Pilots Users Guide - Manual (Page 43)

EFIS Operation
5-10 EFIS-D100 Pilot’s User Guide
Abbreviation Display Item Function
GTRK Ground Track Toggles the display of the ground track indicator on the heading tape. The track
indicator is a magenta arrow and is only displayed when the EFIS-D100 is receiv
valid GPS data from an external source. If the GTRK button status displays “Y” and
no ground track arrow is displayed, the EFIS-D100 cannot detect your GPS, or the
GPS does not yet have a satellite lock.
ing
WIND Winds Aloft arrow and speed indicator. The display of winds
-
-
Toggles the display of the wind
aloft requires an active GPS connection and an OAT probe. If the WIND button
status displays “Y” and no wind indicator is displayed onscreen, the EFIS-D100
cannot detect your GPS, the GPS does not yet have a satellite lock, the FlightDEK
D180 does not have a connection to the remote compass (EDC) or the FlightDEK
D180 does not have an OAT.
ASTRND . Airspeed Trend Toggles the display of the 6-second airspeed trend indicator next to the IAS tape
VSI Vertical Speed Indicator
0
Toggles and configures the display of the VSI tape next to the altitude tape. The
VSI can be hidden (“N”), or can be set to 1k, 2k, or 4k ft/min scaling. The 200
ft/min display is linear throughout the range, while the 1000 and 4000 ft/min
displays incorporate a non-linear scale to increase low vertical speed resolution.
CDI Course Deviation Indicator
above the slip/skid ball. Choosing
Toggles and configures the display of the CDI and glideslope. Choosing “CDI”
causes the course deviation indicator to display
“CDI+GS” causes both the CDI and glideslope indicators to display, with the
glideslope indicator displayed next to the roll scale. If the CDI button status
displays “Y” or “CDI+GS” and no CDI or glideslope is displayed onscreen, the
EFIS-D100 cannot detect your NAV radio or GPS, there is no active course, or
there is no NAVSRC chosen on the HSI page.