Dynon Avionics EFIS-D100 Pilots Users Guide - Manual (Page 42)

EFIS Operation
EFIS-D100 Pilot’s User Guide 5-9
corresponding to one of rns the respective onscreen item on or o owing table summarizes the
dis breviatio nction.
these options tu ff. The foll
play item ab ns and their fu
Ab n breviatio Display Item Function
ALTBAR Altimeter Bar Toggles the display of the graphical altitude tape.
ALTDIG Altimeter Digital Toggles the display of the digital altitude window.
IASBAR Indicated Airspeed Bar Toggles the display of the graphical airspeed tape.
IASDIG Indicated Airspeed Digital Toggles the display of the digital airspeed window.
HDG Heading Toggles the display of the heading tape and digital display.
BALL Slip/skid Ball Toggles the display of the slip/skid ball and associated center markers.
TURNRT Turn Rate Toggles the display of the turn rate indicator and associated scale markers.
AOABAR AOA Bar Toggles the display of the angle of attack indicator. The AOA indicator requires the
use of a Dynon heated or unheated AOA probe.
CLOCK Clock Toggles the display of the clock. Setting Zulu/local and 12/24 hour time is done in
the EFIS > SETUP > CLOCK menu.
BARO Altimeter Setting Toggles the display of the current altimeter setting (also known as the Kollsman
setting). This display is not required to adjust the altimeter setting. While in the
EFIS > BARO menu, a separate value-setting box appears, allowing adjustments to
be made.
ROLL Roll Scale
stays fixed on the screen and the
oll
Toggles and configures the display of the roll scale. When set to “N”, the roll scale
is not displayed. When set to “1,” the roll scale
pointer moves along the scale, like a jet EFIS presentation. When set to “2”, the r
scale moves with the horizon, while the pointer stays fixed on the screen, like most
mechanical attitude instrument presentations.