Dynon Avionics EMS-D10 Pilots Users Guide - Manual (Page 40)

EMS Operation
EMS-D10 Pilot’s User Guide 7-7
through 8 in the same fashion
The Info Items Config submenu appears, allowing you to move up and down the list, selecting which parameter you
would like displayed at each info item position. To change the function that a given item displays, press UP▲ or
DOWN▼ until it is selected (the > symbol is to its left), and press SEL► to cycle through the available functions.
Repeat this for each info item you’d like displayed. One of the options available is NONE, which prevents that info item
from displaying.
Any function that you have selected to be an info item has that fact reflected in its corresponding SENSORS
configuration page. In its configuration page (EMS > SETUP > SENSORS > relevant sensor type), a label at the bottom
of the menu indicates which info item(s) the parameter is set up to be displayed at.
The HS34 has 3 general purpose inputs and 4 contact inputs. The data obtained from these inputs can be
configured and displayed on any EMS page in the system. In the event of a DSAB or HS34 failure, data
obtained from the HS34 inputs will be marked as invalid on screen.