Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 17)

17
TPS1100 - User Manual 2.2.1en Description of the system
6
10
At a target distance of 100 metres
(330 ft) a red/yellow flashing cone of
light with a width of 6m (20 ft) is
formed on each side. As a result,
guiding to the line of sight of the
instrument is much easier and faster.
Between the two cones of light a
sector about 30mm wide is created.
Within this sector both colours are
flashing simultaneously. In this case
the prism is already right in the line of
sight.
Operating range:
5 - 150 m (15 -500 ft)
Divergence:
10 m (33ft) at 100m (330 ft)
RCS (Remote Controlled Surveying)
The RCS option (Remote Controlled
Surveying) permits all models to be
controlled from the target area.
Especially qualified for this purpose
are the TCA and TCRA instruments.
RCS 1100
For further information, refer
to the RCS1100 user
manual.
Combined operation, partly at the
TPS1100 and partly at the prism, is
also possible.
As a result, surveys can be
performed solo. It is also possible to
monitor the operation on the RCS
1100 and / or to enter the coding on
the RCS 1100.
All functions of the TPS1100,
including the applications programs,
are available on the RCS 1100. The
display and the use of the keys are
as for the TPS1100.