Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 88)

88 System functions TPS1100 - User Manual 2.2.1en
6
0
2
21
26
(Valid only for motorized instruments)
The telescope is automatically
pointed at the latest point to be
stored. This function is available only
if a point was stored after the
instrument was switched on.
LAST mode (LAST) Hz / V
Activates the Hz/V
mode.
In Hz/V mode, the TPS1100 can be
turned by set angle values.
The input options are:
• absolute angle values which relate
to the orientation of the TPS1100
• relative angle values which cause
the TPS1100 to turn away from its
present position by the amount
entered.
Quits the Hz/V mode and
starts the search mode, if
ATR is activated.
Switches between absolute
(ABS) and relative (REL).
RCS\ Hz/v
Set relative Hz- and V-angles
Hz/ ∆∆∆∆∆ Hz : 0°00'00"
V/ ∆∆∆∆∆ V : 0°00'00"
CONT ABS
MC
QUIT