Panasonic Panafax UF-755 - Manual (Page 29)

If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine’s display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number, but you may use any number up
to 20 digits long.
Setting Your ID Number (Fax Telephone Number)
SET MODE (1-6}
ENTER NO. OR A V
1 1:USER PARAMETERS?
PRESS SET TO SELECT
SET
repeatedly until display shows;
ID NO.
1
4 ClUtfr yu
rSR^
Enter your ID (max. 20 digits) by using the key pad and
Ex: [H [S m HSCE] [H [5] [E
isPACEimi2imr^
If you make a mistake, press I CLEAR 1 to erase the
number then reenter the correct number.
ID NO.
201 555 1212
5
SET
1=^
15"
® STOP
m
Note: 1. You may use E to enter a characfer af the beginning of the ID number to indicate the following
digit(s) for your country code.
Ex:
+1 201 555 1212 +1 for U.S.A. country code.
+81 3 111 2345 +81 for Japan country code.
2. For some countries, Uiis feature is not available depending on the country’s regulation.
The display may not show this feature.
27