Panasonic Panafax UF-755 User Manual
Page 84
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Fax Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Fax Access
Code is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to reenter the access code in order to use the machine
again. Registering the Fax Access Code does not affect the use of the machine in any other way.
Setting the Fax Access Code
1 5
FUNCTION
7
SET MODE (1-6)
Q
ENTER NO. OR A V
2
3
SET
IUrZD
FAX PARAMETER(01-53)
NO.=|
38 FAX ACCESS CODE
nil
4
5
Enter a 4-digit Fax Access Code.
Ex: [HU] [US]
SET
@ STOP
38 FAX ACCESS CODE
1234
LI
Note:
To erase the Fax Access Code, enter Access Code and press
I SET I
and follow the procedure above
to step 3, then press
1 CLEAR I! SET I
and
I STOP I.
Operating Your Machine with Fax Access Code
Enter the Fax Access Code.
1
Ex: [Ulus]®
08-DEC-1993
15:00
ACCESS CODE=|
SET
tS'
Now you can operate the machine using normal
procedures.
08-DEC-1993
15:00
ACCESS CODE=1234
08-DEC-1993
15:00
00
%
82