Manual redialling, To redial the last dialed number through adf, Manual number dialling – Panasonic Panafax UF-755 User Manual

Page 60: Sending ddtiumeh

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Sending Ddtiumeh^

Redialling

Automatic Redialling

If the line is busy or there is no answer, your machine will redial the
number up to 5 times at 3 minutes interval. During that time, a
message will appear as shown to the right.

• If the tine is still busy after the last try, a message will appear as

shown to the right and your machine will print out a COMM.

Journal depending on the setting of Fax Parameter No. 12.

WAITING TO DIAL

(Telephone number)

INCOMPLETE

INFO, CODE=630

• When transmitting from memory and there is no answer after the last try, the stored document will be

automatically erased. If you wish to retain the document in memory even if the transmission failed, change
the setting of Fax Parameter No. 31 (INC. FILE SAVE) to Valid (see page 36), To retry an incomplete
document.(see page 81)

Manual Redialling

You can also redial the last dialed number manually by pressing the rREDIALl key.

To redial the last dialed number through memory

1

2

3

DOCUMENT SET

ENTER STATION(S) 00%

Set document(s) face down.

Make sure that the MEMORY lamp is on.

PAUSEffiEDtAL

<> START

TEL

NO.

5551234

ts

* STORE *

N0.002

PAGE=01

01%

The document is stored into memory with a file number.
Then dials the last dialed number.

To redial the last dialed number through ADF

1

^4

,

Set document(s) face down.

2

3

TEUDIAL

PAUSE/RED1AL

Your machine starts to dial the last dialed number.

DIALLING

*

DIALLING

*

55512341

58

Advertising