Abbreviated dialling (adf transmission), Senctm^ p^u ri^^nts – Panasonic Panafax UF-755 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II
Senctm^ p^u ri^^nts
Abbreviated Dialling (ADF Transmission)
Abbreviated diaiiing is a speedy way to dial a frequently dialed telephone number by preprogram the
telephone number in the built-in auto-dialer with a 2-digit abbreviated code. To program an abbreviated
dialling number, see page 30.
1
Set document{s) face down.
DOCUMENT SET
ENTER STATION(S) 00%
MEMORY
Make sure that the lamp goes off.
2
Press
I
AB8R
i
and a 2-digit code.
Ex:
i
ABBR
imiQl
ABBR
[10](Station name)
The display will show the ABBR number and station
name. The full number (e.g. 9-555 1234) will then be
dialed.
*
DIALLING
*
9-555 12341
iJ Note:
1. To stop the transmission, press I
STOP
I
,
The display shows;
COMMUNICATION
STOP?
1;YES 2-.NO
Press Q] fo stop the transmission.
2. if you hear the voice of the other party through the monitor speaker after last step, lift the handset of
your external telephone and press I
STOP
i and [T] to stop the communication. Then press
I
STOP
i to stop the alarm. When you hear the beep after telling the other party to prepare to receive
the document, press I
START
I to start fax communication.