Adjustments, Setting up, Cautlotk – Panasonic TC-LT1 Series User Manual
Page 14: Using when placed on the floor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up
(Please see page 18 concerning the projection distance and location for installing.)
Using when placed on the floor.
Attach the mirror unit and the setting stand (see p. 8)
Preparation;
Place the projector on the floor, and use the mirror unit and setting stand to stand the projector upright.
Adjustments
o
Grasp the centre of the Set Stand with your hands, and rotate 90
degrees as shown in the diagram at right, until the cover locks with
a click.
^CautloTK
O
In case of placement on floors,
please use fall-prevention
panel.
Malfunctions or injuries are
liable to be caused if the unit
falls down.
Set Stand
Fall prevention
panel
@
Stand the Projector on the Floor.
Adjust the mirror angle so that the picture
shines on the centre of the screen.
Mirror
• Please refer to the measurements on page 18 when setting up the projector.
O
Setting the projection settings. Please see page 13 for details.
PICTURE
1
SIGNAL MODE
SETTING 2
POSITION
3
SETTING
CLOCK
FEATURES
LANGUAGE
4
Select "SETTING 2"
14