Panasonic TC-LT1 Series - Manual (Page 29)

Convenient Options for Use
■Setting the Screen Colour to Blue When There is no Signal.
This sets the screen colour to blue when no devices are attached to any of the input terminals to the Projector, or when no
signals are being input from any of the connected devices.
SottinQ PrOCOdure {Example; When using AV1 and AV2)
O
Press the MENU Button
Use the ▲ and ▼ buttons to select “FEATURES" Menu.
Then use the 4 and ► buttons to execute.
Use the ▲ and ▼ buttons to select “BLUE BLACK".
Then use the 4 and ► buttons to switch the Blue Back off or on.
Press the MENU Button twice to complete.
PICTURE
COLOUR SYSTEM
SETTING
FEATURES
LANGUAGE
BLUE BACK ON
P*DE
OFF
NOISE TIMER OFF
• Unrecognisable signals input are treated as no signal being input.
Adjusting P . DE (Picture Detail Enhancer)
Adjusting the picture clarity to your preference during Video Input.
Setting Procedure
o
Press the MENU Button
Use the ▲ and ▼ buttons to select "FEATURES” Menu.
Then use the
4 and ►buttons to execute.
Use the ▲ and ▼ buttons to select "P DE”.
Then use the 4 and ► buttons to switch the P- DE on or off.
On..... increases clarity
Off..... reduces roughness.
PICTURE
COLOUR SYSTEM
SETTING
FEATURES
LANGUAGE
BLUE BACK OFF
P-DE
ON
NOISE TIMER OFF
Auto Adjustment of Picture At (Artificial Intelligence)
During video input, this feature automatically uses the optimum staged compensation at all times for the picture being
viewed, to provide a clear picture with a comfortable contrast.
Setting Procedure
• Press ^ button on the remote control (the display will switch between On and Off each time you press the button).
Al On - Bright and clear contrast. The picture colours are reproduced with high clarity.
Al Off -- Normal picture. The Al feature is not used.
Al On and Off settings are recorded for each picture menu (Pictures 1 through 3).
29