Panasonic TC-LT1 Series - Manual (Page 38)

Specifications
Projector
Type LCD Projector
Power Source
TC-LT1F, TC-LT1G, TC*LT1 H, TC-LT1X, TC-LT1C TC-LT1N
AC 220-240V 50/60 Hz AC 110V 60 Hz
Power Consumption 160W {Stand-by condition : approx, 5W)
Colour System PAL, SECAM, NTSC 3.58, NTSC 4.43
LCD Panel O.OType Transparent LCD Panels (3), 3Primary Colour Type, 921,600 dots (307,200 x 3)
Lens Manual Zoom Type (Zoom Ratio 1 ;1.4), Manual Focus Type
Optical Lamp 100W UHP Lamp
Optical Output 400ANSI Lumens
Projecting Screen Size 33 type - 250 type (projection distance 1,2m ~ 9m) [at RGB input]
Screen Aspect 4:3
Projection Method 4 Methods (Reflection Possible Left, Right Up and Down)
Audio Output 1.0W (Monaural)
Connection
Terminals
Video Input 1 and 2 *S-Video Priority
NTSC 3.58, NTSC 4.43, PAL, SECAM
S-Video (S Terminal): Luminance, Colour Signal Separation
Video (Pin jack); 1 Vp-p (75ii)
Audio (Pin jack): Left and Right O.SVrms
RGB input (D-sub 15 pin)
Horizontal 24 kHz - 49.7 kHz, Vertical 50 Hz - 75 Hz
Weight (Mass) 8.4 Kg (Net [only for main unit]), 9 Kg (Net [including mirror unit and set stand)
Dimensions
Width: 306 mm Height: 167 mm Depth: 506 mm (including mirror unit and set stand)
(When using mirror: Depth 621 mm Depth Alone : Depth 402 mm)
Accessories Supplied
• Remote Control (TNQE114) • Video Cord (1.5 m) x 2 • Screws for mounting LCD Projector
• R6 (AA) Battery x 2 • S-Video Cord (1.5 m) x 2
• Screws for mounting on a wall
• Lens Cap • Analog RGB Cord (1.5 m) • Operating Instructions
• Set Stand • Polishing Cloth • Installation Instructions
• Terminal Cap • Wall Mounting Fixtures
• Mirro Unit • LCD Projector Mounting
Fixtures
38