Adjustment procedure, Fine adjustment of dot clock frequency, Adjustments for rgb input screen – Panasonic TC-LT1 Series User Manual
Page 27: Adjusting the dot clock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustments for RGB Input Screen
■ Adjusting the Dot Clock
Fine adjustment and clock phase adjustment of the dot clock frequency is possible during RGB signal input.
Please follow the following procedure to adjust, while looking at the screen.
Adjusting the Clock Phases
By adjusting the phases you can remove screen flickers and blurred contours that result from computer images using RGB
signal inputs.
Adjustment Procedure
o
Press the MENU Button.
Use the ▲ and ▼ buttons to select “CLOCK” Menu.
Then use the
4
and ► buttons to execute.
Use the ▲ and ▼ buttons to select "CLOCK PHASE”
Use the
4
and
k
buttons to adjust.
Press the MENU Button twice to complete.
PICTURE
SIGNAL MODE
POSITION
SETTING
CLOCK
FEATURES
UNGUAGE
CLOCK
PHASE
32
DOT CLOCK ADJUST 32
CLOCK PHASE
35
• Press the "N"
button to
return to the
normalisation
setting.
Fine Adjustment of Dot Clock Frequency
The Projector allows adjustment of the area of picture display at the time of RGB Signal Input.
Adjustment Procedure
o
@
Press the MENU Button.
Use the
a
and ▼ buttons to select the "CLOCK" Menu.
Then use the
4
and ► buttons to execute.
Use the
a
and
w
buttons to select "DOT CLOCK ADJUST”.
Use the
4
and ► buttons to adjust.
©
Press the MENU Button twice
to complete.
PICTURE
SIGNAL MODE
POSITION
SETTING
CLOCK
FEATURES
LANGUAGE
CLOCK
PHASE
32
DOT CLOCK ADJUST 32
DOT CLOCK ADJUST
35
•
Press the "N"
button to
return to the
normalisation
setting.
In some cases the picture will not display normally if the Dot Clock Frequency is substantially out of adjustment.
27