Panasonic PV-4614 - Manual (Page 15)

Record On a Tape
Check list before you begin.
All connections are made.
(See pages 6'“9.)
VCR is Plugged in.
TV is turned on and set to the VCR
channel (CH3 or CH4).
Insert a cassette with record tab
VCR power comes on automatically.
Vrg—
LI ж 13
Push VCR CH A/v or
NUMBERED keys to
select a channel.
• Or, push CHANNEL A/V on
the VCR.
• To record from an outside
source, push VCR CH A/T to
select “LINE" (see next page).
(D: SPEED
О
Push SPEED to change
current recording speed.
• SP = Standard Play, LP = Long
Play, SLP = Super Long Play.
REC/TIME
Push RECyTIME
, . to start recording.
• Or, push PLAY and REC/TIME on the VCR.
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off
at a preset time.
Continue to push REC/TIME to set ✓ ♦ Normal Rec
the recording length. Each push will
change the stop time as shown.
• “TIMER" lights in the Multi Function Display.
c
4йО^ЗЮ0^2ЮО-<-130'
D
Push STOP to
stop recording.
- Or, push STOP/EJECT on the VCR.
Watching Another TV Program
1 Push VCR/TV while recording is
in progress to turn off the VCR
indicator in the Multi Function
Display.
2 Use the TV channel controls to
select a program. The VCR
will continue to record your
program while you watch any
channel you choose.
• Switch back and forth between
the recording and viewing
channel with the VCR/TV
selector.
Selecting Channels at the VCR
i Turn TV on.
Ч I ✓
-VCR-
Multi Function
Display
If indicator doesn't light,
push VCR/TV to turn it on.
2 Use VCR CH
A/T
buttons to select channels
for viewing or recording.
• To resume TV control channel
selection, push VCR/TV
to turn VCR indicator off, or simply
turn VCR off.
Rapid Tune
Push R-TUNE to display the last
channel you were watching.
Previous Present
Channel Channel
CH08------- ►СНЮ
• When selecting channels with the
VCR CH
A/T
buttons, channels
must be displayed for at least 4
seconds in order for the VCR to
recognize them as a new selection.
Holding down the VCR CH
A/T
buttons will increase the channel search speed.
Push PAUSE to pause a recording in progress.
The recording time remaining appears if the DISPLAY button is pushed during OTR mode.
After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and video head.
15