Panasonic PV-4614 - Manual (Page 18)

/
<1
—^
K
Tape Operation (continued)
COMMERCIAL
I^^Check list before you begin
AH connections have been made and
LJ the One Time Setup is completed.
PI Your TV and VCR are plugged in and
^ turned on.
□ TV is tuned to the VCR channel (CH 3
or 4).
ADVANCE™
COMMERCIAL ADVANCE™ Playback
When playing back recordings which have been marked using the
COMMERCIAL ADVANCE™ feature, you can either set the VCR to
automatically advance through marked commercial blocks, or set it so
that commercials are only skipped on your command.
1
z 1 ' * "______________ 1 1
I f ^
o
^
1
PLAY ' FAST FORWARD/
SEARCH
0)1
Push MENU to display
the menu screen.
! MENU I
Rotate and push the
WHEEL to select and
set SET UP VCR from
the menu screen.
MENU
SCT CLOCK
SET UP CHANNEL
IDI DMA/LANGUE: ENGL 1SH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate and push the
WHEEL to select and
set SET UP
COMMERCIAL ADV.
■■ SET UP VCR
REPEAT PLAY : ON
beeper : ON
INPUT SELECT : TUNER
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
L
Rotate the WHEEL to
select C/A PLAYBACK
and push to set AUTO
or MANU(al)-
SET UP COMMERCIAL ADV.
C/A RECORD
C/A PLAYBACK
1 ON
: AUTO
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
AUTO
The VCR will automatically advance through
marked commercial blocks recorded on the tape
and then resume playback.
MANU(ah
advance through commercials only
' ' when the C/A SKIP ZERO button is pushed.
Playback will resume when the end mark of a
commercial block is found, or a new recording or
blank portion is detected, or after eight minutes.
MENU
Push MENU three times to
return to the normal screen.
18
The selection made in step 4 remains set unless there is a power outage in which case the original
factory setting wilt be restored.
A commercial may not be skipped if playback is started in the middle of a commercial, only a single
isolated commercial is shown, or an individual commercial is longer than one minute. Push FAST
FORWARD/ SEARCH to quickly advance through the commercial.
Part of a recorded program may be skipped over if the program portion between commercials is less
than one minute, or there are frequent dark and quiet scenes. Rewind the tape to the beginning of the
skipped portion and push PLAY.