Panasonic PV-4614 - Manual (Page 17)

COMMERCIAL ADVANCE TM
COMMERCIAL ADVANCE™ detects and marks the beginning and end points of commercials on your tape for
recordings over 15 minutes in length. When the COMMERCIAL ADVANCE™ marked tape is played back, the VCR
automatically advances through the commerciai segments at high speed. You can also set this feature to Manuai
so as to have more controi over the advance process.
The effectiveness of this system can vary due to differences in the way teievision stations broadcast.
See page 19 for answers to the most commoniy asked questions about this feature.
Bi,
Check list before you begin
□ All connections have been made and
the One Time Setup is completed.
□ Your TV and VCR are plugged in and
turned on.
n TV is tuned to the VCR channel (CH 3
or 4).
The selection made in step
4 remains set unless there
is a power outage in which
case the original factory
setting will be restored,
if the time interval between scheduled
timer recordings is insufficient for
marking, the VCR will wait until all
recordings are finished before marking
them.
The VCR can store up to 8 programs
or 40 commercial blocks in memory at
one time. As marking is performed,
memory storage space is replenished.
However, if storage capacity is
exceeded, the remaining commercials
will not be marked.
COMMERCIAL ADVANCE™ is a
trademark of Arthur D. Little Enterprises.
A Jerry Iggulden invention licensed by
Arthur D. Little Enterprises.
COMMERCIAL ADVANCE™ Marking
When the COMMERCIAL ADVANCE RECORD setting is ON, the
VCR automatically rewinds the tape after a recording has been made
and marks the beginning and end of any detected commercial blocks.
After marking is done, the tape is returned to the end of the
recording. Commercials are not erased from the tape.
Push MENU to display
the menu screen.
Rotate and push the
WHEEL to select and
set SET UP VCR from
the menu screen.
MENU
И4Д1]!ИМ||
SET CLOCK
SET UP CHANNEL
ID1ОМА/LANGUE:ENGL ISH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate and push the
WHEEL to select SET
UP COMMERCIAL ADV.
--------------SETUPVCR........................
REPEAT PLAY : ON
BEEPER
: ON
INPUT SELECT : TUNER
SET UP COMMERCIAL ADV.
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Push the WHEEL to
select C/A RECORD
ON or OFF.
SET UP commercial aov .
яиатаияд
C/A PLAYBACK
ON
AUTO
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.
MARKING
NOW
: PUSH 1 KEY
LATER : PUSH 2 KEY
CANCEL : PUSH CLEAR KEY
QM Timer recordings, VCR Plus+ recordings, and One Touch
Recordings are marked automatically.
The screen at right appears when
STOP is pushed during a normal
recording. Select one of the following:
Push the 1 NUMBERED key to mark
the recording now. The screen below
right will appear.
Push the 2 NUMBERED key, to mark
the recording later, after the power
has been turned off.
• If the tape is rewound and another
recording started before the power
is turnecToff, the commercials may
not be marked correctly.
Push CLEAR to cancel the marking
of this recording.
OFF
The VCR will not mark commerdais.
Off should be selected when you are
editing or dubbing a tape, or when you
simply do not wish to use this feature.
NOW MARKING COMMERCIALS
CANCEL : PUSH CLEAR KEY
Push MENU three times
to return to the normal
screen.
17