Case 1: twin lead cable only, Case 2: twin lead & coaxial cables, Case 3: two twin lead cables – Panasonic PV-4614 User Manual
Page 7: Case 1: screw & plug type terminal, Case 2: screw type terminal, Case 3: double screw type terminal, Case 4; complex tv terminal, B)to
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Between Antenna and VCR
Between VCR and TV
Case 1: Twin Lead Cable Only
To VCR Terminal
-
SI®
(Flat) Twin Lead 300
300-75 ohm Transformer
Ohm Cable
(not supplied)
Case 2: Twin Lead & Coaxial Cables
(Round) 75 Ohm
coaxial Cable
UHF/VHF
Band Mixer
(not supplied)
ID
To VCR Terminal
Case 3: Two Twin Lead Cables
• If your TV has both post and screw-type VHF
terminals, using the post connection is
recommended to minimize signal loss.
Case 1: Screw & Plug Type Terminal
UHFA/HF Band Separator
^V
(not supplied)
VHF
^ B)to:
RF Coaxial Cable
Case 2: Screw Type Terminal
TV
UHF/VHF Band Separator
(not supplied)
UHF
Case 3: Double Screw Type Terminal
TV
VHF
UHF
Case 4; Complex TV Terminal
TERMINALS ON BACK OF TV SET
Connect to one of the ANT terminals and select
the same antenna number on the TV.