Toll saver, Summary of remote control functions, Toll saver -4 – Panasonic KX-F50BA User Manual
Page 51: Summary of remote control functions -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating as an Answering Device from a
Remote Phone
You can retrieve the incoming messages and re-record your outgoing message
from a remote location with a touch tone telephone.
The following features are available on this unit.
• Message playback
•Newly recorded message playback (Memory Playback)
•Back space and skip forward
•Recording a marker message
• Resetting the tape for future messages
• Re-recording the OGM (outgoing message)
• Skipping the OGM for ICM (incoming message) recording
These operations are available only in TAD/FAX mode. If your unit is in the TEL
mode, call your unit and wait for 15 rings. The unit will switch to the TAD/FAX mode.
Toll saver
When you call the unit from a remote location, the number of rings tells you if there
are any new voice-messages.
If the unit answers on the 2nd ring, there is at least one new message recorded.
If the unit answers on the 4th ring, there are no new messages recorded.
Hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there
are no new messages. This will save you the toll charge for the call.
The toll saver works only when TAD RING COUNT is set to the Toll Saver position.
See page 4-6.
Summary of remote control functions
Note: For your convenience, the quick reference card for remote operation is
attached in these operating instructions. See pages 4-14 and 4-15,
3-4