1/f remote connector (l/f remote), Power indicator, Cable clamp – Panasonic Convertible Camera AW-E800 User Manual
Page 11: G/l input connector (g/l in), Optional card slot, Dc 12 v input connector (dc 12v in), Cautions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
11.1/F Remote Connector (l/F REMOTE)
Input terminal dedicated to control signals from the
optional Remote Control Box (RGB) (WV-CB700A)
and the RCU (WV-RC700A, WV-RC550) and the
camera pan/tilt unit (AW-PH300),
* WV-CB700A is connected through the optional RGB
cable {AW-CA50T10/AW-CA50B10),
* WV-RC700AA/VV-RC550 is connected through the
optional RCU cable (AW-CA50A26),
* AW-PH300 is connected through the optional pan/
tilt unit cable {AW-CA50T15/AW-CA50A15).
12. Power Indicator
Red LED lamp lights to indicate that the specified
DC power is supplied to the camera.
14. Cable Clamp
Clamp the DC Power Supply Cable (AW'CA4T1)
connected to the DC 12 V Input Connector to pre
vent it from slipping out.
15. G/L Input Connector (G/L IN)
Signals synchronized with the reference signal are
to be supplied to this connector when the camera is
to be synchronized with the reference signal BB.
16. Optional Card Slot
Slot for inserting an optional card. For details, refer
to the manual for optional cards.
13. DC 12 V Input Connector (DC 12V IN)
12 V DC is supplied through the optional DC power
supply cable (AW-CA4T1).
($K^
- Cautions--------------------------------------------------------------------
1.
Connect this to a DC 12 V class 2 power supply
only.
2.
To prevent fire or shock, the UL listed wire VW-1,
style 1007 should be used as for the cable for DC
12 V Input Connector,
-
9
-