Lens mount, Mounting hole, Lens fixing ring knob – Panasonic Convertible Camera AW-E800 User Manual

Page 9: Cooling fan, Menu switch (menu/t), Item/awc switch (item/awc/1)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1. Lens Mount

2/3" Standard bayonet type lens or a microscope
adaptor can be mounted.

2. Mounting hole

A screw hole (1/4" - 20 UNC) ior mounting the cam­
era on a wall, ceiling with a mounting bracket or tri­

pod.

3. Lens fixing ring knob

Rotate the lens fixing ring knob counterclockwise
and remove the lens mount cap. Mount the lens on

the camera and rotate the lens fixing ring knob

clockwise in order to fix the lens securely.

4. Cooling Fan

• Do not cover the port or otherwise block ventilation

during operation. Internal heat buildup can cause a
fire.

• The cooling fan has a service life of about 30 000

hours, (at a room temperature of 25°C) Replace the

fan that has come to the end of its service life. (If
the fan is used at a room temperature of 35°C,

replace it about 30% sooner.)

Whenever fan replacement is necessary, be sure to
ask the store where you purchased the set,

5. MENU Switch (MENU/t)

A menu will appear on the monitor screen when this

switch is pressed for about 5 seconds. This item
can be selected by pressing the switch while the
menu is on the screen.

6. ITEM/AWC Switch (ITEM/AWC/1)

The item just below can be selected by pressing
this switch while the menu is on the screen. When

the menu is not displayed or the camera is in shoot­

ing mode, the automatic white balance control can
be set with this switch.

-

7

-

Advertising