Total pedestal level adjust ment – Panasonic Convertible Camera AW-E800 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ TOTAL PEDESTAL LEVEL ADJUST
MENT
(Use an oscilloscope or a waveform monitor for this
adjustment.)
This step is to adjust the black levels (pedestal levels)
of two or more cameras to be the same.
[ADJUSTMENT by CAMERA]
1. Close the lens.
2. Select Pedestal item in the brightness setting Sub
Menu (Select [Pedestal] in the [Iris, Shutter, Gain
Set] sub menu in USER MODE.)
3. Set the pedestal level to 5 IRE (0.035 V) with the
YES/ABC switch or the NO/BAR switch.
[ADJUSTMENT with RCU (RGB, Hybrid control panel)]
Adjust the pedestal level to 5 IRE with the total pedestal
adjustment.
••BrightnoBB set*»
Picture Level
±0
Light PEAX/XVa
0
Light Area Top
cut
Auto ND{ELC)
OFF
Auto Gain Op
OFF
Hami Gain Dp
OdB
Pedestal
±0
Contrast (Garmia)
MID
Return
V.
-
24
-