Notes, Connection of a remote control unit (rcu) – Panasonic Convertible Camera AW-E800 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTION OF A REMOTE CONTROL UNIT (RCU)
Connection to the RCU {WV-RC700A, WV-RC550) is
made through the optional RCU cable AW-CA50A26.
1.
Turn RCU power off before connecting cables.
2. Set the cable selection switch of the RCU to MULTI
{in case of using the WV-RC700A)
3. Connect the 50-pin connector of the RCU cable to
the l/F REMOTE Connector of the camera.
4. Turn RCU power on and the power indicator lamp
will light. The camera can now be remote con
trolled by the RCU,
Notes:
• The maximum extension distance between the
camera and WV-RC700A is 300 m. The maximum
extension distance between the camera and WV-
RC550 is 300 m,
• Use the following options for cable extension.
Studio Cable WV-CA26U15 (15 m/50 ft)
WV-CA26U30 (30 m/100 ft)
WV-CA26U100 (100 m/330 ft)
Cable Joint Adaptor
WV-CA26T26
-
15
-