Ф horizontal phase adjustment [h phase, Ф subcarrier phase fine adjustment [sc fine, Ф color bar setup setting [color bar set – Panasonic Convertible Camera AW-E800 User Manual
Page 45: 0 ire^.s ire, Ф detail level setting [detail: off/low/high, Ф detail band setting [detail band: 1 - 5, Of'c
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q
a
LÍTO
i
n
PED
в
[of'c^
¿MuTTBS ESt?S
I >R
w4*í«^i wtn^ í
’0"“'D' ¿r.
■R/B Gain
Control
• R/B Pedestal
Control
RCU (RCB)
Ф
2-dÍmensíonat Lowpass Filter Setting [2D LPF:
OFF/LOW/HIGH]
The 2D lowpass filter that reduces moire and cross
color сап be set.
Ф
Horizontal Phase Adjustment [H Phase:
-206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
Ф Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarher phase can be
made when a genlock signal is supplied.
Ф Subcarrier Phase Fine Adjustment [SC Fine:
-511 -+511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
Ф Color Bar Setup Setting [Color Bar Set:
0.0 IRE^.S IRE]
The setup level of color bar can be adjusted.
Ф
Detail Level Setting [Detail: OFF/LOW/HIGH]
Contour correction quantity can be selected.
Detail settings made using the Horizontal/Vertical
Detail Level HIGH/LOW Setting ф.
Ф Horizontal/Vertical Detail Level HIGH/LOW
Setting
[H Detail Level H: +1 -+63]
[V Detail Level H : + 1 -+31]
[H Detail Level L: 0 - +62]
[V Detail Level L: 0 - +30]
Detail level can be set in horizontal (H) and vertical
(V) directions with the Detail Level Setting ф at
HIGH or LOW.
Whichever the direction, H or V, the set level at
HIGH must be at least one position higher than that
at LOW.
Ф Detail Band Setting [Detail Band: 1 - 5]
A contour correction band can be set with the
Detail Level Setting Ф at HIGH or LOW. The higher
setting, the finer will be the detail.
-
43
-