Tuning the tv to your vtr, Display symbol – Panasonic NV-SD400 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning the TV to your VTR
■ — RF W : , IN - OÜT
JyiDeql,
; ;
@ №i
' ’ ^U0l3
itr- RF otiT io)
1,5
it is possible to view the video picture on your TV in the
same way that you watch TV broadcasts.
H you have connected the VTR to the TV through the
video and audio input sockets then you do not need to
follow the procedure mentioned beiow. instead, simply
select AV mode on the television.
Operations
Display Symbol
1
Turn on the TV and VTR.
VTJVrV
o
Select the VTR mode.
LH
D
Select the video playback channel which is
not occupied with any TV station.
NV-SD400A:
NV-SD400EA:
H: Channel 1
H: Channels
L; Channel 0
L; Channel 2
Insert a pre-recorded cassette tape and
press PLAY.
Select a programme number on the TV set
which you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the cassette tape currently playing.
NV-SD400A:
In some areas channel 0 may be used by local TV station.
In this case switch to channel 1.
Stop the playback.