Panasonic NV-SD400 - Manual (Page 29)

Before Requesting Service
Other Functions
Before Requesting Service
Before requesting service, check the following points once again.
Message of On Screen Dispiay
Message of On Screen Display is displayed.
MESSAGE CAUSE REMEDY
PLEASE PUT IN
A VIDEO CASSETTE.
REC is pressed without
cassette. Put in a video cassette.
PLEASE STO P THE TAPE. TUNER PRESET is selected
during playback.
Stop the tape.
PLEASE SET THE CLO CK. PROG is pressed when the
clock is not set.
Set the clock.
PLEASE USE A CASSETTE
W ITH TAB.
REC is pressed without tab of
Cassette.
Use a cassette with tab.
TIM ER RECO RDING
HAS BEEN SET.
TIMER REC is pressed with
no timer programmes.
Set timer recording.
TIM ER PRO G RAM M ES ARE
FULL.
G-CODE is pressed when
8 programmes have been
already set.
Cancel unneccessary programme.
VTR IS IN THE TIM ER
STANDBY M O DE,
POWER is pressed during
timer standby mode.
Press TIMER REC to release from timer standby mode.
DEW FO RM ED IN THE VTR.* Dew forms. Wait until the message disappears.
‘Only for NV-SD400A.
Seif Test indication
This VTR has a self-diagnosis and display function. If the VTR detects trouble during installation or during use, the following
indications automatically appear in the VTR display. Indications are displayed in the form of a single English letter plus two
numbers such as [H01].
INDICATION CAUSE REMEDY
U 1 0’ Dew forms. Wait until the indication disappears.
H o a Some trouble has occurred.
(Numbers following H and F
Consult your for further advice.
F o a
differ according to the status
of the VTR.)
£5
.c
X
X
•Only forNV-SD400A.
(29)