Panasonic NV-SD400 - Manual (Page 14)

storing TV Broadcasts into your VTR
Introduction
The VTR is fitted with its own tuner (just like a normal TV
set) and can be pre-set to receive up to 99 TV broadcast
stations.
Preparations
•Confirm that the TV is on and the VTR viewing channel is
selected.
•Turn on the VTR and select the programme position
except AV.
•Press VTR/TV to select the VTR mode.
Auto Tuning Procedure
Operations
PRE-PROGRAMMED TV CHANNELS
(NV-SD400A)
The local TV transmission channels 2,7,9 and 10
are factory-preset in this VTR, That is, if you can
receive television broadcasts on VHF channels 2,7,
9 and 10, these are already tuned on the programme
positions with the matching numbers.
However, it is possible to cancel these presettings
and tune the local TV broadcast channels on any
desired programme positions.
For alternative settings and tuning of additional TV
broadcasts channels, follow the Tuning Operations.
DATE. ': ON OFF
CO:?G12»..QD
"
I
; fTVHEOT
,
fO q W q I
MENU EKTER
-
■y i y;"'-
On Screen Dispiay
1
o
MENU
OSOMENU
•UAHGUAGE
CLDCKSET
TUMERPRESET
G.CODECHSE1
OPTION
demonstration
SELECT :9a.ENTSR
END :MENU
Press MENU.
2
©
©
• Q
ENTER
OSDMENU
LANGUAGE
CLOCK SET
■TUNER PRESET
G400ECHSET
OPTION
DEMONSTRATION
SELECT 'aB,EKTER
END tUENU
1 Select TUNER PRESET.
r--------------
'I CHI
.CLEAR, t.,..
-,AUTO TUNE-
wm”""
ON »OFF
•VL VH UHF
SEARCH
RNE
5ELECT-.DD -/+.-W
L
,
Select AUTO TUNE and
press ◄ or ►.
•When the Auto Tuning finished, On
Screen Display disappears and
programme position 1 is selected.
Notes:
•The Auto Tuning is searching for TV station from VHF
minimum to UHF maximum and memorizing the data for
every programme position. The other programme
positions are skipped.
•The Auto Tuning takes seven or more minutes to
complete the search.
• If VTR is not correctly tuned by Auto Tuning, follow the
procedure on next page.
4)