Panasonic NV-SD400 - Manual (Page 21)

Playback
other Playback Functions
To obtain High Speed Picture During Fast
Forward or Rewind
Keep FF pressed during fast forward.
Keep REW pressed during rewind.
To playback the Recorded Part
Repeatedly
Keep PLAY pressed for more than 5 seconds.
Beginning
of Tape rm n
End of
Recorded Part
EL H
Repeat Playback gjgpal Interruption
PLAY {at least 5 sec.)
o
REW
• Press STOP to release from Repeat Playback mode.
To return to a Specified Scene
1 Press RESET to set the counter to 0:00.00.
flKET
0
2 After playback, press ZERO STOP in the stop mode.
•The tape will be rewound or fast forwarded to 0:00.00.
ZERO^OP 0
To find the Beginning of Each Recording
For example:
Searching for the 2nd recorded segment in the forward
direction.
Press INDEX twice.
f-INDEX-i
(£) 0
•Afterfinding the specific recorded segment, playback
starts automatically.
•For the reverse direction, press INDEX
•Up to 20 Index signals can be searched for in both
directions.
•When the opposite INDEX button is pressed, the number
shall be decreased till 1.
•The figure on the display is decremented by 1 each time
an index signal is located.
Recording Index Signals
Index signals are recorded in following cases.
•When a recording is started by pressing REC.
•When REC is pressed during recording.
•When timer recording is activated.
Notes:
•Cue, review or slow playback will be automatically
released after 10 minutes, and still playback after
5 minutes.
•The INDEX search function can only work correctly, if the
index signals are spaced at least 3 minutes apart in the
SP mode and 5 minutes apart in the LP mode.
•In LP mode only:
1. During any playback mode other than normal
playback, the picture may have some noise bars, the
colour may be unstable, or a black and white picture
may appear.
2. When playing back a tape which was recorded on
another VTR, it may be necessary to adjust the
Tracking Control. In some cases the picture quality
may still be inferior. This is due to limitation of format.
(21)