Manual tuning procedure, Channel plan, Fine tuning procedure – Panasonic NV-SD400 User Manual
Page 15: Blanking of unoccupied programme positions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Storing TV Broadcasts into your VTR
Manual Tuning Procedure
1 Press MENU.
2 Select TUNER PRESET by pressing
A
or
T
and
ENTER.
3 Select CH by pressing
A
or
T
and then select the
programme position by pressing ◄ or ►.
4 Confirm that CLEAR is set to OFF.
5 Select BAND by pressing
A
or ▼ and then select TV
band VL, VH or UHF by pressing or ►.
6 Select SEARCH by pressing
A
or
T
and then press ►.
r
CMJ SEARCH VH;+i
J
CH2 SEARCH VH
•If the desired TV station is not be tuned, press ► again.
•Press MENU and repeat steps 3-6 for each
programme position you want to tune to a station.
7
Press MENU three times.
Channel Plan
VHF
UHF
VH
NV-SD400A
0-5
5A-12
21-69
NV-SD4Q0EA
1-3
4-11
21-69
NV-SD400A:
Broadcast TV Channel
Position tuned on VTR
2 ABC
2
7ATN
7
9TCN
9
10 TEN
10
28SBS
28
Fine Tuning Procedure
1 Press MENU.
2 Select TUNER PRESET by pressing
A
or ▼ and
ENTER.
3 Select CH by pressing
A
or
T
and then select the
programme position by pressing ◄ or ►.
4 Select FINE by pressing
A
or
T .
5 Press or ► to obtain the best tuning condition.
CH2
PtNE +
-/+: •• AFC: ENTER
J
•To return the tuning to its former state, press ENTER.
6
Press MENU.
Blanking of Unoccupied Programme
positions
1 Press MENU.
2 Select TUNER PRESET by pressing
A
or ▼ and
ENTER.
3 Select CH by pressing
A
or
T
and then select the
programme position by pressing or ►.
4 Select CLEAR by pressing
A
or ▼.
5 Select ON by pressing ◄ or ►.
• Repeat steps 3-5 for another unoccupied programme
positions to skip during the selection of the programme
positions.
•To cancel the blanking of a programme position, select
that programme position and then select CLEAR OFF.
6 Press MENU twice.
§
0)
CO
This table will be required when programming the G-Code.
(
15
)