I i] ^ 3 d, Motuwethfr- motuwethfrsa— su motuwethfr sa – Panasonic NV-F70EA User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
For Everyday Recording
For Everyday Recording, you have the choice between
3 different modes; Monday through Friday, Monday through
Saturday, and Sunday through Saturday.
MOTUWETHFR-
MOTUWETHFRSA—
SU MOTUWETHFR SA-
<D
For example:
Programme time for timer recording every day from 10:30
to 11:45 on timer programme number
8
.
Programming for everyday recording can be made on any
of the timer programme numbers
1
-
8
.
Execute the operation steps O fo O.
^ Press the (-) Button until the desired type of Everyday
Recording ((T), (g), @) is displayed.
Perform the operation steps O to
To Confirm the Programme of a Timer Recording
Make sure that the VTR is turned on.
Make sure that the Timer Record Function is set to “On”.
Select the programme number to be checked, by repeated
ly pressing the Check/Programme Button.
The preset channel and start and ending times of the timer
recording will be indicated for about
12
seconds.
To Cancel a Timer Recording
Make sure that;
the VTR is turned on,
the Timer Record Function is set to “Off".
0 Press the Check/Programme Button repeatedly, until
the number of the timer programme that you want to
cancel is displayed.
0 Press the (+) and (-) Buttons simultaneously for more
than 3 seconds.
•After the programmed timer recording has been
made, set the Timer Record Function to “Off", oth
erwise the VTR cannot be operated normally.
• During recording, the programme position (channel)
on the VTR cannot be changed.
•When you want to watch TV after setting a timer
recording, select the desired channel on the TV set.
•To cancel a timer recording during recording, set
the Timer Record Function to “Off”.
• It is impossible to confirm programmes of timer re
cordings while an OTR is being performed.
•To turn the VTR on and use it for playback or re
cording before the timer recording is performed, set
the Timer Record Function to “Off”.
•When the Timer Record Function is set to “On" but
no video cassette is inserted or no timer recording
has been programmed, the Timer Recording Indi
cator
0
will flash to inform that the timer recording
cannot be performed.
• If no cassette is inserted in the VTR, the “B”
Mark will flash.
SP DM
(start time)
SP
(end time)
I i] ^ 3 D
(4 seconds)
PROG
H ’li (next
8
seconds)
33