Adjusting the waveform, Adjusting the waveform in luminance, Full scan(y) – Panasonic PT-AE1000 User Manual
Page 13: Fullscan(r), Fullscan(b), Contrast r, Adjusting the wave form in green, Full scan, Single line scan, Brightness g
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote control operation
Remote control operation
—-------- You can monitor if the brightness and
contrast level of the input signal is in the
recommended range by displaying it in
waveform. See "WAVEFORM MONITOR"
on page 32.
1. Project a commercial adjusting signal.
2.
Press
the
WAVEFORM
button to display the
waveform monitor.
3. Press
WAVEFORM
button to select the
required adjusting mode.
4.
Press
A T
◄ ► to adjust the displaying
position of the waveform monitor.
Adjusting the waveform
Make sure to adjust to the 0% line first.
Adjusting the waveform in luminance
Display the
PICTURE
menu and adjust
BRIGHTNESS and
CONTRAST
with ^ ►.
OFF
FULL SCAN(Y)
FULLSCAN(R)
FULL SCAN(G)
FULLSCAN(B)
.Adjust the bottom line of the
BRIGHTNESS
^ waveform to 0 % (0 IRE).
Setting range: -32 to +32___________
|Adjust
the top
line
of the waveform
CONTRAST
to 100 % (100 IRE).
' Setting range: -32 to +32__________ _
I
Adjusting the
waveform
in red
Display the
ADVANCED
menu and adjust
BRIGHTNESS R
and
CONTRAST R
with ◄ ►.
You can adjust the more
detailed focus
I
LENSI
and
zoom of the projected image. Press
You can switch the preset picture mode
settings by pressing the
PIC. MODE
button. Press the button until the required
setting is selected. See "PICTURE MODE"
on page 31.
the
LENS
button to
display
the
LENS control
menu.
See "LENS CONTROL Menu" on page 37.
SINGLE LINE SCANfB]] BRIGHTNESS R
SINGLE LINE SCAN(G)
CONTRAST R
SINGLE LINE SCAN(R)
[Adjust the bottom line of the
[waveform to 0 % (0 IRE).
Setting range: -16 to +16
¡Adjust the top line of the waveform
to 100% (100 IRE).
Setting range: -16 to +16
SINGLE LINE SCAN(Y)
Adjusting the wave form in green
Display the
ADVANCED menu
and adjust
BRIGHTNESS G
and
CONTRAST G
with ◄ ►.
OFF
Deactivate the waveform
monitor.
FULL SCAN
SINGLE LINE SCAN
Monitoring the waveform of
brightness and contrast of the
whole image.
BRIGHTNESS G
CONTRAST G
Monitoring the
waveform
of
brightness and contrast in
each horizontal line of the
image. Press A V
to
select
the required line.
: Adjust the
bottom
line of the
' ■•■/aveform to 0 % (0 IRE).
: Setting
range:
-16 to +16
! Adjust the top line
of the
waveform
'to 100% (100 IRE).
I Setting range: -16 to +16
Adjusting the wave form in black
Display the
ADVANCED
menu and adjust
BRIGHTNESS B
and
CONTRAST
B with ◄ ►,
BRIGHTNESS В
CONTRAST В
Adjust the bottom line of
the
waveform
to 0 % (0 IRE).
Setting
range:
-16 to +16
You can display one of the
PICTURE
or
ADVANCED
menu items by pressing the
PICTURE ADJUSTMENT
button. Press
the button to switch between PICTURE
and
ADVANCED
menu.
Press A
▼ to
select the required menu item and ◄ ► to
adjust.
PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS.
COLOUR, TINT, SHARPNESS, COLOUR
TEMPERATURE
and
DYNAMIC IRIS
You can switch off the
POWER
automatically by setting the
SLEEP
feature. Press the
SLEEP
button several
times to cycle through the duration of time.
See "SLEEP" on page 39.
Adjust the top line of the waveform
to 100% (100 IRE).
Setting range: -16 to +16
Adiust to 100%
0)
0)
0)
о
' Recommended
range
NOTE:
• SINGLE LINE SCAN
is monitoring the signal in
the required line and more detailed adjustment is
available than
FULL SCAN.
• When you adjust the
SINGLE LINE SCAN,
the
position of the waveform is depends on the
position of the selected line.
• When the
WAVEFORM
is displayed, the
COLOR
MANAGEMENT
is disables.
iMEMim
You can access saved settings instantly.
See "MEMORY LOAD" on page 33,
1.Select the required setting from
MEMORY1 - 5.
• Undefined setting will not be displayed.
2. Press
ENTER to
activate
the
selected setting.
f e t t o 0 % Monitor position
24
-
E
nglish
NORMAL
NATURAL
DYNAMIC
pWEMAI^
♦
VIDEO
CINEMA2
СГНЁМАЗ
ADVANCED menu items
GAMMA,
CONTRAST,
BRIGHTNESS, COLOR
MANAGEMENT, NR, MPEG NR, CINEMA
REALITY
and
TV-SYSTEM
NOTE:
• For each menu items
description,
see “PICTURE
Menu” on page 31.
• The screen will be cleared after 7 seconds without
any operation.
"OFF
MOMIN.
60MIN.
21ÒM1N.
90MIN.
ilOMIN.
Î2ÔMIN.
.4,.
150M1N.
NOTE:
• If you have not saved any settings,
MEMORY1
--------- *
■ • / —
are not displayed.
ENGLISH -
25