Setting up, Adjusting the lens shift dial • horizontal, Horizontal shift – Panasonic PT-AE1000 User Manual
Page 9: I vertical shift, I projector location range, After fixing the screen position, The adjustable projection range, Note, 16 - e
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up
Tmov^T Len°J SIT ■'i?'"-" T"l °'!T T"'^!°.'*’"
■==" "“j“*« me projected image position
Dy moving the Lens shift dial • Horizontal within the shift range of the lens
^
■ Adjusting the Lens shift dial • Horizontal
# Horizontal shift
You can place the projector where the projector lens is up to 40% horizontally off-centre from the screen and
then adjust the image position with the
Lens shift dial • Horizontal.
Up to about 40% Up to about 40%
of the projection of the projection
Screen
l
T**
r
' # »
lit..
......- ■-—
------- ...
--------------- ----
clockwise;
Moving to screen’s right
Turning the dial
counterclockwise;
Moving to screen’s left
I Vertical shift
You can place the projector where the projector lens is up to 100% vertically off-centre from the screen
adjust the image position with the Lens
shift dial • Vertical.
Turning the dial counterclockwise;
Moving to screen’s bottom
and then
Up to about 100%
of the projection
Up to about 100%
of the projection
--n.
Screen"'"'--,,
i.Ja_____________________
Turning the dial clockwise;
Moving to screen’s top
16 - E
nglish
Setting up
I Projector location range
You can determine where to locate the projector by considering the
Lens shift dial • Horizontal
possibilities.
See “Positioning the image” on page 21 for available placement.
After fixing the screen position
■ ,.i
The adjustable projection range
100
%
Projection size
100
%
r.............................
............ ..........
.............. Shift range
^ i
: i.........
Standard jositior
/■
40“/ !
\
40%
Project on size
i
NOTE:
• When the projecting position is fully moved to the vertical limit of the shift range, you cannot move
horizontally, likewise when the projecting position is fully moved to the horizontal limit of the shift range, you
cannot move vertically.
• When the projector is tilting and you adjust
KEYSTONE,
the centre of the screen and the lens need to be
realigned.
• Do not force the
Lens shift dial» Horizontal
to turn as this may damage the projector.
E
nglish
-17