Top and front view, Note, Back and bottom view – Panasonic PT-AE1000 User Manual
Page 7: Air intake port, Component in, 12 - e
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About Your Projecto
Top and front view
Air exhaust port
Heated air
comes
out of this opening.
Lens shift dialAfertical
(page 16)
Projection lens
I
Lens cover
Remote control
Protects the
Projection
signal receptor
lens
from dust or dirt.
(page 22)
Air exhaust port
Heated air comes
out of this opening.
INPUT
SELECT
Switch to cycle through the
input method, (page 23)
Navigate through the menus with
A ▼ ► ◄, and activate the menu
item with
ENTER,
(page 28)
(Push to open/close the cover.)
POWER
While the
MAIN POWER
is on,
switch between stand-by mode
and project mode, (page 20)
MENU
Display the
Main
menu.
Return to the previous menu,
(page 28)
RETURN
FOCUS and
ZOOM
Return to the previous menu.
Adjust the focus and size of
(page 28)
the image, (page 37)
NOTE:
• Do not cover the ventilation openings or place anything within 10 cm (4") of them as this may cause damage
or injury.
• While the projector is not in use, attach the
Lens cover
to protect the lens.
Projector
Back and bottom view
Air intake port
Security lock
Attach the commercial shackle
lock,
manufactured by
Kensington, to protect your
projector. Compatible with the
Kensington MicroSaver Security
System.
Top cover
Hold at the back corner of the
Top
cover
and slightly push up to
open, (page 42)
Front leg adjusters
Screw up/down to adjust the
projection angle, (page 21)
AC IN
Connect the
Mains lead
to supply
electronic power to the projector,
(page 19)
SERIAL
Connect a compatible cable
for controlling the projector
remotely via your PC.
PC IN
Connect an RGB signal
cable
from your PC.
COMPONENT IN
Connect a YPBPR signal
cable.
Connecting
terminals
(page 18)
S-VIDEO
IN
Connect a S-VIDEO
signal cable.
VIDEO IN
Connect an RCA
composite video cable.
NOTE:
• Do not cover the ventilation openings or place anything within 10 cm (4") of the vents as this
may
cause
damage or injury,
• This projector should only be used with the attached
Mains lead
to ensure optimum performance and avoid
damage to the projector.
• Do not open the
Top cover
other than replacing the lamp unit.
12 - E
nglish
E
nglish
-13